MCC-10 Climate computer for poultry Alerta

Specifications

Complete ventilation controller for all kinds of poultry. Controls fans, heaters, airinlets, cooling,light, feed, water, alarm. 

OPTICON POULTRY COMPUTER MCC-10
 
VENTILATION 
Based on house temperature, outside temperature, age and weight of the birds, or on negative pressure, the house computer calculates the amount of fresh air needed and controls the number of fans or their speed. It is possible to control fans in 2 groups in 2 different modes; example ridge fans for winter ventilation in variable speed and gable end fans for summer ventilation or variable speed fans and in steps by ON/OFF fans.
AIR INLET 
Based on house temperature, outside temperature, calculated amount of ventilation, the house computer controls the air inlet opening in order to have the optimal air speed in order to avoid drafts or cold air drops. Depending on computer capacity the air inlets can be controlled in 4 or more separate groups. 
HEATING 
For maximum energy saving, house computer activates the heating system when the ventilation level is back at the minimum rate in order to reach the target temperature. The heating can be controlled on/off or proportionally: in order to heat only where it is necessary the heating can be divided in zones.
COOLING (pad cooling and/or fogging)
A full control of the cooling, and not just a on/off control based on temperature, is essential. Based on house temperature and R.H. level, the house computers control the cooling on the basis of the admissible air humidity at certain temperature levels in order to optimize the house environment. 
LIGHTING 
In order to optimise light programs and obtain maximum results in terms of feed consumption, egg production and egg quality, the house computer controls time and duration of light periods and light dimmers with dusk/dawn simulation.
FEED 
Enough feed but fresh: unsufficient feeding means drop in production and bodyweight but too much feed means spillage and stale feed into the troughs. So it is important, to know the consumption per feed run and per day in order to adjust the number and the times of feeding and the setting of the feed level out of the feeders into the troughs. The house computer can display and register feed consumption data received via a mechanical weigher, electronic batch weigher or silo weighing. (in combination with PMS-20 or BMS-20)
WATER 
Correct water consumption contributes to achieve good production results. Connecting the house computer to one or more electronic water meter, this displays and register water consumption per house signals any eventual off-limit of the conusumption parameters.
ALARM SIGNALING 
The house computer detects power failures, off-limit reading of temperatures, water consumption, feed consumption, minimum stock into the bins.
MANAGEMENT 
One or more house computers can be connected to a PC where a dedicated software program collects all the data received and display in tables or charts, feed conversion, feed and water ratio, daily growth, mortality, time and duration of minimum and maximum temperatures. With this option, the same person reading the records, can do the remote setting.
Can send daily reports via email, connection via Internet system.